1.Technical parameters
| NO. |
Name |
Parameter |
| 1 |
The raw materials: |
tyre waste ,medical waste ,plastic waste |
| 2 |
Daily capacity: |
12 ton/day |
| 3 |
The size of reactor |
2800*6600mm 16mm thickness |
| 4 |
Reactor material |
Q345R |
| 5 |
Average oil productivity: |
30%-80%, |
| 6 |
pyrolysis time |
6-8 hours |
| 7 |
Discharge time |
1.5 hour |
| 8 |
Feeding time |
3 hourS |
| 9 |
Cooling time |
3 hours |
| 10 |
Working pressure |
Normal /slightly negative |
| 11 |
Power |
18 kw |
| 12 |
Fuel |
Coal. Wood, gas etc |
| 13 |
Working area |
1000 square meters |
| 14 |
Total weight |
35 000kgs |
| 15 |
Reactor rotate speed |
0.25-0.4/min |
| 16 |
Noise |
No less than 85DB |
| 17. |
Plant working area |
700-1000 square meters |
2. Major parts :
reactor with base and cover
oil -gas separator
heavy oil tanl
cooling system
light oil tank
water sealing
dedust system
waste gas recycle system
slag out device
control board
3. Work flow
loading plastic into reactor
heating reactor
after heating , solid plastic converted to oil gas
oil gas go into oil-gas separator ,heavy oil deposit and go to heavy oil tank, light oil gas go to cooling system
after cooling ,light oil gas change to liquid oil and go into light oil tank
non-liquid oil gas will to water sealing tank, then back to combustor burning to heat reactor as fuel
smoke produced by heating reactor will go to dedust system, after dedust system treatment , smoke change to white clean waster steam ,then go to sky through chimney.
4. oil rate
| Oil yied/day |
Waste tire/ rubber |
Big tyres |
45%--50% |
| Car tyres |
40% |
| Bicycles and motorcycles tyres |
30%--35% |
| Waste plastic |
Fishing net |
45%--50% |
| Safety net , farm-oriented film |
| Conwenient bags , weave bags |
40% |
| Off cut of recycled paper mill |
20%--30% |
5.plant features:
1.)Environmental protection equipment: The complete set of unit produces
no smoke and no smell
2.) High efficiency and good performance: the output capacity of pure raw
is more than 80% . net oil yield over more than 40%
3. )The design of unit is reasonable and advanced :fatey and easy to use
6.oil parameter
| project |
Tire oil |
Plastic oil |
| Water content |
3%-5% |
3%-5% |
| Sulfur content |
0.3%-0.5% |
0.3% |
| Density (g/ml) |
0.86-0.94 |
0.84-0.94 |
| Cetane number |
30 |
30 |
Combustion value
(kcal) |
9500 |
9000 |
| Asphalt |
≤0.5% |
≤0.8% |
| Ash |
≤1% |
/ |
| Impurity |
1%-3% |
/ |
| Solidifying point( ºC) |
-10 |
10 |
| Flash point ( ºC) |
30-40 |
20-35 |
){kind=link}
){kind=link}