1.Technical parameters
| NO. |
Name |
Parameter |
| 1 |
The raw materials: |
used tyre |
| 2 |
Daily capacity: |
20 ton/day |
| 3 |
The size of reactor |
11000*2500*2200mm |
| 4 |
Reactor material |
Q345R |
| 5 |
Average oil productivity: |
30%-80%, |
| 6 |
Average carbon productivity: |
20%-35% |
| 7 |
oil rate |
30%-80% |
| 8 |
pyrolysis time |
6-8 hours |
| 9 |
Discharge time |
1.5 hour |
| 10 |
Feeding time |
3 hourS |
| 11 |
Cooling time |
3 hours |
| 12. |
Working pressure |
Normal /slightly negative |
| 13 |
Power |
18 kw |
| 14 |
Fuel |
Coal. Wood, gas etc |
| 15 |
Working area |
1000 square meters |
| 16 |
Total weight |
35 000kgs |
| 17 |
Reactor rotate speed |
0.25-0.4/min |
| 18 |
Noise |
No less than 85DB |
| 19. |
Certificate |
Ce,.iso, |
| 20. |
Carbon slag out |
Automatic |
2. Major parts :
reactor with base and cover
oil -gas separator
heavy oil tanl
cooling system
light oil tank
water sealing
dedust system
waste gas recycle system
control board
3. Work flow
loading plastic into reactor
heating reactor
after heating , solid plastic converted to oil gas
oil gas go into oil-gas separator ,heavy oil deposit and go to heavy oil tank, light oil gas go to cooling system
after cooling ,light oil gas change to liquid oil and go into light oil tank
non-liquid oil gas will to water sealing tank, then back to combustor burning to heat reactor as fuel
smoke produced by heating reactor will go to dedust system, after dedust system treatment , smoke change to white clean waster steam ,then go to sky through chimney.
5. Plant features:
1.) Static pyrolysis , reactor non-rotate, produced oil with less dust, oil quality is more better
2.) Pyrolysis reactor is tube type,
3.) Feed raw material is by trolley, more fast, high efficiency
4.) Aftter pyrolysis ,carbon slag is on brick piece,no carbon powder, so no powder fly in air, more environmental
5.) Carbon discharge is by trolley, fast and high efficiency
6.)Whole tyre can be load by trolley, no neet to cut tyre, saving time and labor,hgih efficency
7.) Reactor non-rotate, no need reducer nor motor to drive reactor, saving power electricity
6.oil parameter
| Items |
Parameters |
| Oxidation stability |
2.0 |
| Sulfur content (%) |
0.05 |
| 10% residue carbon content( %) |
0.25 |
| Ash content (%) |
0.016 |
| Copper corrosion grade |
1.1 |
| Moisture content (%) |
- |
| Mechanical impurities |
none |
| Density |
0.85 |
| Freezing Point /°C |
0 |
| Flash point)/°C |
40 |
| Kinematic viscosity |
3.5 |
| Combustion value( kcal) |
8000 |
| Chromaticity |
1.2 |
| Cetane index |
43 |
Audited Supplier 
){kind=link}